Toshiba 03 fault code
Toshiba air conditioning
What the Toshiba 03 fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
Stage-one block code. Toshiba: "Protective circuit operation for others (including compressor)". The compressor sits in this block, so treat it as the serious one of the four.
Source: Toshiba service manual SVM-19001-3 (Seiya) / SVM-18009 (Shorai P) §11-3, Table 11-3-1 (flashing-LED block codes)
UK models this code applies to
Tap yours to open 03 on that machine.
Wall-mounted79
Cassettes17
Ducted20
Ceiling suspended10
Floor consoles3
Floor-standing4
Indoor and outdoor pairs1
Multi-split outdoor units13
Outdoor units108
Other models30
03 on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Now the harder half: proving what caused it
03 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase 03 on your machine →Free, no sign-up. Pick the model: where we hold Toshiba's own chart for it, it takes you through one question at a time.
Or watch one get chased — free demo →Related codes
- 1CCompressor drive output error
- 1dCompressor does not rotate
- 1EDischarge temperature exceeded 117 °C
- 1FCompressor high current at minimum frequency
- 02OPERATION lamp flashing 5 Hz: protective circuit, OUTDOOR P.C. board
- 04Indoor ↔ outdoor serial signal fault
- 07Outdoor return signal stops after start
- 11Indoor fan motor fault
- 12Other trouble on the indoor P.C. board
- 14Inverter over-current (short-time limit)