Toshiba 07 fault code
Toshiba air conditioning
What the Toshiba 07 fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
Block 03. The outdoor unit returned its signal at start-up, then stopped sending after a while. Recorded once detected 4 or 8 times. The indoor unit runs on; the outdoor stops.
Safety: Safe isolation before opening terminal covers — mains present on the interconnect.
Source: Toshiba service manual SVM-19001-3 (Seiya) / SVM-20015-4 (Shorai Edge) §11-4, Table 11-4-1
UK models this code applies to
Tap yours to open 07 on that machine.
Wall-mounted49
Cassettes17
Ducted10
Ceiling suspended10
Floor consoles1
Floor-standing4
Indoor and outdoor pairs1
Outdoor units94
Other models30
07 on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Wall-mounted33
Ducted10
Multi-split outdoor units13
Now the harder half: proving what caused it
07 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase 07 on your machine →Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.
Or watch one get chased — free demo →Related codes
- 1EDischarge temperature exceeded 117 °C
- 1FCompressor high current at minimum frequency
- 02OPERATION lamp flashing 5 Hz: protective circuit, OUTDOOR P.C. board
- 03OPERATION + TIMER flashing 5 Hz: protective circuit, OTHERS…
- 04Indoor ↔ outdoor serial signal fault
- 11Indoor fan motor fault
- 12Other trouble on the indoor P.C. board
- 14Inverter over-current (short-time limit)
- 16Compressor position-detect circuit error / winding short
- 17Inverter current-detect circuit error