All fault codes

Toshiba 1F fault code

Toshiba air conditioning

What the Toshiba 1F fault code means, from the manufacturer's own service literature, and the UK models it applies to.

What it means

Compressor high current at minimum frequency

Block 03. The compressor is still drawing high current even though the operating Hz has been reduced to its minimum limit — installation problem, refrigeration-cycle problem, or a failing compressor.

Safety: Safe isolation before disconnecting the compressor or testing the inverter board — capacitors hold charge.

Source: Toshiba service manual SVM-19001-3 (Seiya) / SVM-20015-4 (Shorai Edge) §11-4, Table 11-4-1

UK models this code applies to

Tap yours to open 1F on that machine.

Wall-mounted49
Cassettes17
Ducted10
Ceiling suspended10
Floor consoles1
Floor-standing4
Indoor and outdoor pairs1
Outdoor units87
Other models30

1F on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.

Wall-mounted33
Ducted10
Floor consoles2
Multi-split outdoor units13
Outdoor units21

Now the harder half: proving what caused it

1F names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.

Chase 1F on your machine →

Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.

Or watch one get chased — free demo →
Download on the App Store

Or use it in your browser on any phone or laptop.

Related codes

All Toshiba fault codes →