Toshiba 02 fault code
Toshiba air conditioning
What the Toshiba 02 fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
Stage-one block code. Toshiba: "Protective circuit operation for outdoor P.C. board". ⚠️ The lamp pattern is the SAME as 00 — OPERATION alone at 5 Hz — so the lamps cannot separate indoor from outdoor. Only the remote check code can.
Source: Toshiba service manual SVM-19001-3 (Seiya) / SVM-18009 (Shorai P) §11-3, Table 11-3-1 (flashing-LED block codes)
UK models this code applies to
Tap yours to open 02 on that machine.
Wall-mounted79
Cassettes17
Ducted20
Ceiling suspended10
Floor consoles3
Floor-standing4
Indoor and outdoor pairs1
Multi-split outdoor units13
Outdoor units108
Other models30
02 on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Now the harder half: proving what caused it
02 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase 02 on your machine →Free, no sign-up. Pick the model: where we hold Toshiba's own chart for it, it takes you through one question at a time.
Or watch one get chased — free demo →Related codes
- 1bTO outside-air sensor fault
- 1CCompressor drive output error
- 1dCompressor does not rotate
- 1EDischarge temperature exceeded 117 °C
- 1FCompressor high current at minimum frequency
- 03OPERATION + TIMER flashing 5 Hz: protective circuit, OTHERS…
- 04Indoor ↔ outdoor serial signal fault
- 07Outdoor return signal stops after start
- 11Indoor fan motor fault
- 12Other trouble on the indoor P.C. board