Toshiba 1C fault code
Toshiba air conditioning
What the Toshiba 1C fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
Block 02 (outdoor PCB). The relation between voltage, current and frequency is abnormal — the compressor is overloaded (over-charge, PMV failure) or failing on high current.
Safety: Safe isolation before working on the inverter board — capacitors hold charge.
Source: Toshiba service manual SVM-19001-3 (Seiya) / SVM-20015-4 (Shorai Edge) §11-4, Table 11-4-1
UK models this code applies to
Tap yours to open 1C on that machine.
Wall-mounted49
Cassettes17
Ducted10
Ceiling suspended10
Floor consoles1
Floor-standing4
Indoor and outdoor pairs1
Outdoor units87
Other models30
1C on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Wall-mounted33
Ducted10
Multi-split outdoor units13
Now the harder half: proving what caused it
1C names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase 1C on your machine →Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.
Or watch one get chased — free demo →Related codes
- 0CTA room sensor short-circuit or disconnection
- 0dTC indoor heat-exchanger sensor fault
- 01OPERATION + TIMER (White) flashing 5 Hz: connecting cable / serial…
- 1AOutdoor fan motor fault
- 1bTO outside-air sensor fault
- 1dCompressor does not rotate
- 1EDischarge temperature exceeded 117 °C
- 1FCompressor high current at minimum frequency
- 02OPERATION lamp flashing 5 Hz: protective circuit, OUTDOOR P.C. board
- 03OPERATION + TIMER flashing 5 Hz: protective circuit, OTHERS…