Toshiba 0C fault code

What it means

Block 00 (indoor PCB). The TA room-temperature sensor is short-circuit or disconnected. The unit keeps running; the display flashes when the error is detected.

Safety: Safe isolation before disconnecting sensors or working on the PCB.

Source: Toshiba service manual SVM-19001-3 (Seiya) / SVM-20015-4 (Shorai Edge) §11-4, Table 11-4-1

UK models this code applies to

Tap yours to open 0C on that machine.

0C on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.

Now the harder half: proving what caused it

0C names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.

Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.

Or use it in your browser on any phone or laptop.