Worcester Greenstore E1X.T1 fault code

What it means

The compressor stops because the flow temperature is too high for the heating circuit. Activated when the sensor shows a value which is 5K higher than the highest set point value for the circuit. The factory setting for the highest set point value is 60 °C for radiator type of circuit and 35 °C for underfloor type of circuit. After hot water production, the alarm is delayed with 4 min.

Source: Worcester Greenstore LECP Installation, Commissioning and Servicing Instructions 6 720 806 768 (2013/02), §21.8 categories + §21.10 alarm functions + §21.13 information log (render-verified)

Can it be reset?

Category E — Stops compressor; lamp+buzzer; 5 s delay; restart before ack. Resets when: The sensor's value falls below the temperature for beginning of the heating demand. Automatic once the alarm cause has disappeared.

Source: Worcester Greenstore LECP Installation, Commissioning and Servicing Instructions 6 720 806 768 (2013/02), §21.8 categories + §21.10 alarm functions + §21.13 information log (render-verified)

UK models this code applies to

Tap yours to open E1X.T1 on that machine.

Now the harder half: proving what caused it

E1X.T1 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.

Free, no sign-up. We don't hold a chart for this code yet — pick the model for its manual section.

Or use it in your browser on any phone or laptop.