Gree En fault code
Gree air conditioning
What the Gree En fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
Compressor speed reduced because module phase current approached its limit.
Source: Gree (Zhuhai) Service Manual, Bora Inverter R32 §9.1 Error Code List
UK models this code applies to
Tap yours to open En on that machine.
Cassettes8
Ducted16
Ceiling or floor8
Floor consoles3
Indoor and outdoor pairs9
Outdoor units4
En on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Now the harder half: proving what caused it
En names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase En on your machine →Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.
Or watch one get chased — free demo →
Or use it in your browser on any phone or laptop.
Related codes
- E4Compressor discharge high-temperature protection
- E5Whole-unit overcurrent protection
- E6Indoor/outdoor communication malfunction
- E8Overload protection
- E9Cold air prevention
- EUFrequency limited — module temperature
- F1Indoor ambient sensor open/short
- F2Indoor evaporator sensor open/short
- F3Outdoor ambient sensor open/short
- F4Outdoor condenser coil sensor open/short