Gree F2 fault code
Gree air conditioning
What the Gree F2 fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
The indoor evaporator coil sensor reads open or short circuit.
Safety: Safe isolation before disconnecting sensors or working on the PCB.
Source: Gree (Zhuhai) Service Manual, Bora Inverter R32 §9.1 Error Code List
UK models this code applies to
F2 on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Wall-mounted4
Cassettes8
Ducted16
Ceiling or floor8
Floor consoles3
Indoor and outdoor pairs9
Outdoor units4
Now the harder half: proving what caused it
F2 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase F2 on your machine →Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.
Or watch one get chased — free demo →Related codes
- E9Cold air prevention
- EnFrequency limited — module phase current
- EUFrequency limited — module temperature
- F1Indoor ambient sensor open/short
- F3Outdoor ambient sensor open/short
- F4Outdoor condenser coil sensor open/short
- F5Outdoor discharge sensor open/short
- F6Frequency limited — overload
- F8Frequency limited — whole-unit current
- F9Frequency limited — discharge temperature