All fault codes

Fujitsu General 22 fault code

Fujitsu General air conditioning

What the Fujitsu General 22 fault code means, from the manufacturer's own service literature, and the UK models it applies to.

What it means

Indoor unit capacity error

The indoor unit's set capacity doesn't match what the system expects — typically after a PCB swap where the capacity wasn't set, or a wrong replacement board.

Source: Fujitsu General ASEH07/09/12/14KMCG service manual (official UK webstore), error-code table + troubleshooting; cross-checked against SR_AS092EF_01. All 23 codes verified model-specific 2026-07-16.

UK models this code applies to

Tap yours to open 22 on that machine.

Wall-mounted33
Cassettes11
Ducted30
Floor consoles6
Outdoor units26

22 on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.

Wall-mounted32
Cassettes13
Ducted34
Ceiling suspended13
Outdoor units2

Now the harder half: proving what caused it

22 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.

Chase 22 on your machine →

Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.

Or watch one get chased — free demo →
Download on the App Store

Or use it in your browser on any phone or laptop.

Related codes

All Fujitsu General fault codes →