Midea EL 01 fault code
Midea air conditioning
What the Midea EL 01 fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
Safety: Safe isolation before opening terminal covers — mains present on the interconnect.
Source: Midea Breezeless 3D INV service manual SM_FA(GA)_R32 (midea.com), §2.1 error-code table
UK models this code applies to
Tap yours to open EL 01 on that machine.
Wall-mounted14
Cassettes12
Ducted12
Ceiling or floor5
EL 01 on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Wall-mounted17
Ducted7
Now the harder half: proving what caused it
EL 01 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase EL 01 on your machine →Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.
Or watch one get chased — free demo →
Or use it in your browser on any phone or laptop.
Related codes
- EH 02Zero-crossing signal detection error
- EH 03Indoor fan speed out of range
- EH 60T1 room sensor error
- EH 61T2 evaporator-centre sensor error
- EL 0CRefrigerant leakage detected
- PC 00IPM malfunction / IGBT over-current protection
- PC 01Over-voltage or under-voltage protection
- PC 02Compressor / IPM overheat or high-pressure protection
- PC 03Low-pressure protection
- PC 04Inverter compressor drive error