Midea EC 07 fault code
Midea air conditioning
What the Midea EC 07 fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
Safety: Isolate before working near the fan — it can restart without warning.
Source: Midea Breezeless 3D INV service manual SM_FA(GA)_R32 (midea.com), §2.1 error-code table
UK models this code applies to
Tap yours to open EC 07 on that machine.
Wall-mounted14
Cassettes12
Ducted12
Ceiling or floor5
EC 07 on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Wall-mounted17
Ducted7
Now the harder half: proving what caused it
EC 07 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase EC 07 on your machine →Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.
Or watch one get chased — free demo →
Or use it in your browser on any phone or laptop.
Related codes
- EC 51Outdoor EEPROM parameter error
- EC 52T3 condenser-coil sensor error
- EC 53T4 outside-air sensor error
- EC 54TP discharge-pipe sensor error
- EH 00Indoor EEPROM parameter error
- EH 0AIndoor EEPROM parameter error
- EH 0bIndoor PCB ↔ display comms error
- EH 02Zero-crossing signal detection error
- EH 03Indoor fan speed out of range
- EH 60T1 room sensor error