Midea EH 0b fault code
Midea air conditioning
What the Midea EH 0b fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
Safety: Safe isolation, then TREAT THE DC LINK AS LIVE. The electrolytic capacitors hold a lethal charge after the supply is off. Discharge through a suitable resistor across the + and − terminals and confirm with a meter on DC before touching the board. Never short the terminals with a screwdriver.
Source: Midea Breezeless 3D INV service manual SM_FA(GA)_R32 (midea.com), §2.1 error-code table
UK models this code applies to
Tap yours to open EH 0b on that machine.
Wall-mounted14
Cassettes12
Ducted17
Ceiling or floor5
EH 0b on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Wall-mounted17
Now the harder half: proving what caused it
EH 0b names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase EH 0b on your machine →Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.
Or watch one get chased — free demo →
Or use it in your browser on any phone or laptop.
Related codes
- EC 52T3 condenser-coil sensor error
- EC 53T4 outside-air sensor error
- EC 54TP discharge-pipe sensor error
- EH 00Indoor EEPROM parameter error
- EH 0AIndoor EEPROM parameter error
- EH 02Zero-crossing signal detection error
- EH 03Indoor fan speed out of range
- EH 60T1 room sensor error
- EH 61T2 evaporator-centre sensor error
- EL 0CRefrigerant leakage detected