Haier LED6 fault code

What it means

Safety: Safe isolation, then TREAT THE DC LINK AS LIVE. The electrolytic capacitors hold a lethal charge after the supply is off. Discharge through a suitable resistor across the + and − terminals and confirm with a meter on DC before touching the board. Never short the terminals with a screwdriver.

How to read it — indoor display + outdoor led1: Faults show as E/F codes on the indoor display; the outdoor PCB reports the same faults as LED1 flash counts — either surface lands you on the same code. (Haier service manual AS25PBAHRA (Pearl), §10 Service Diagnosis)

Source: Haier service manual AS25PBAHRA (Pearl) §10.3

UK models this code applies to

Tap yours to open LED6 on that machine.

Now the harder half: proving what caused it

LED6 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.

Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.

Or use it in your browser on any phone or laptop.