Hitachi 01300 fault code

What it means

The indoor control cannot read its stored data. Named 'EEPROM data reading error' on RAK-PSE and 'IC401 data reading error' on RAK-PED — same fault class.

Safety: Safe isolation, then TREAT THE DC LINK AS LIVE. The electrolytic capacitors hold a lethal charge after the supply is off. Discharge through a suitable resistor across the + and − terminals and confirm with a meter on DC before touching the board. Never short the terminals with a screwdriver.

Source: Hitachi Technical Catalogue §9.10 / §10.1.2 Error Code Information (RAK-PSES(W)/RAC-WSE — Hitachi UK; RAK-PED/RAC-WED — Hitachi R32 catalogue), both render-verified

UK models this code applies to

Tap yours to open 01300 on that machine.

01300 on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.

Now the harder half: proving what caused it

01300 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.

Free, no sign-up. Pick the model: where we hold a chart for it, it takes you through one question at a time.

Or use it in your browser on any phone or laptop.