Grant Aerona E34 fault code

What it means

AC input voltage abnormal

Supply voltage outside range at the refrigerant/drive PCB.

Safety: Safe isolation, then TREAT THE DC LINK AS LIVE. The electrolytic capacitors hold a lethal charge after the supply is off. Discharge through a resistor across the + and − terminals (Gree specifies approx. 100 Ω 20 W, Toshiba approx. 100 Ω 40 W) and confirm with a meter on DC before touching the board. Never short the terminals with a screwdriver.

UK models this code applies to

From the Grant service literature we hold (Grant Aerona 290 installation manual DOC0204 Rev 1.8, Table 11-1) — not a scraped list.

Now the harder half: proving what caused it

E34 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.

Free, no sign-up. Pick the model and follow Grant Aerona's own chart for it, one question at a time.