Fujitsu Waterstage 9/7 fault code
Fujitsu Waterstage heat pumps
What the Fujitsu Waterstage 9/7 fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
Outdoor unit fan motor 1 error
Source: Fujitsu Waterstage Super High Power D&T Manual, §Control System pp.03-3…03-5 — numeric display codes, interface-card LED pairs and outdoor-board flash counts with the published decode procedure
UK models this code applies to
9/7 on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Now the harder half: proving what caused it
9/7 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase 9/7 on your machine →Free, no sign-up. We don't hold a chart for this code yet — pick the model for its manual section.
Or watch one get chased — free demo →Related codes
- 8/4Current sensor error
- 8/6Pressure sensor error / pressure switch error
- 9 flashesHeat sink thermistor error
- 9/4Current trip
- 9/5Detection of compressor position error / compressor start-up error
- 9/8Outdoor unit fan motor 2 error
- 10/1Discharge temperature protection
- 10/3Compressor temperature protection
- 10/4Outdoor unit pressure error
- 10/5Low pressure abnormal