Bosch Compress HH fault code
Bosch Compress heat pumps
What the Bosch Compress HH fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
H6 displayed 10 times in 2 hours
Source: Bosch Compress 2000 AWF Installation Manual 6721859133, §12.2 (pp.156-159, render-verified)
UK models this code applies to
Tap yours to open HH on that machine.
Outdoor units37
HH on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Now the harder half: proving what caused it
HH names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase HH on your machine →Free, no sign-up. We don't hold a chart for this code yet — pick the model for its manual section.
Or watch one get chased — free demo →Related codes
- HATW_out leaving water temperature sensor (plate heat exchanger)
- HbPP protection trips 3 times and Tw_out < 7 °C
- HdCommunication error between master and slave units
- HECommunication error between main board and thermostat
- HFInverter module EEprom error
- HLPFC module fault
- HPLow pressure protection (Pe < 0.6) tripped 3 times in one hour
- P0Low pressure protection
- P1High pressure protection
- P3Compressor overcurrent protection