Bosch Compress E9 fault code
Bosch Compress heat pumps
What the Bosch Compress E9 fault code means, from the manufacturer's own service literature, and the UK models it applies to.
What it means
Th suction pipe sensor error
Source: Bosch Compress 2000 AWF Installation Manual 6721859133, §12.2 (pp.156-159, render-verified)
UK models this code applies to
Tap yours to open E9 on that machine.
Outdoor units37
E9 on these comes from each model's own manual, which may not match the meaning above — tap yours to read it.
Now the harder half: proving what caused it
E9 names a symptom, not a root cause. In the app, the same code opens a guided investigation: what to measure first, the expected values for your exact model, and an honest verdict — including “nothing in this machine is broken” when that's what the readings say.
Chase E9 on your machine →Free, no sign-up. We don't hold a chart for this code yet — pick the model for its manual section.
Or watch one get chased — free demo →Related codes
- E0Flow switch error (E8 displayed 3 times; to be seen together with E8)
- E1Phase sequence error (three-phase units only)
- E2Communication error between user interface and main hydraulic module…
- E3Backup heater's heat exchanger outlet T1 temperature sensor error
- E4T5 DHW temperature sensor error
- E5Finned coil outlet T3 refrigerant temperature sensor error (cooling…
- E6T4 room temperature sensor error
- E7Tbt1 sensor error
- E8Water flow-rate error
- EATp discharge temperature sensor error